Mannol Headlight Polishing & Restoration Kit 9801

Contents:

1 pc polishing sanding disc with hook-and-loop fastening (suitable for cordless screwdrivers/drills)

2 pcs sanding papers, 2000 grit

2 pcs sanding papers, 1200 grit

2 pcs sanding papers, 800 grit

1 pc masking tape, 3000 × 20 mm

2 pcs polishing compound, 40 g

1 pc polishing sponge (orange)

1 pc finishing sponge (white)

2 pcs UV-protective nano compound, 7.5 ml

Instructions for Use:

Clean the surface thoroughly with water.

Mask the surrounding areas using masking tape.

Wet the surface and sand it in a clockwise direction.

Use the sanding discs in the following order: 800 → 1200 → 2000 grit. Sand the surface for several minutes with each grit, keeping it wet at all times.

Polish the surface using the compound and sponge until it becomes glossy and transparent.

Clean and dry the surface.

Apply the nano compound with the finishing sponge and allow it to dry for 2 hours.

IMPORTANT:

Before opening the polishing compound sachet, knead it to ensure the material is evenly mixed.

Use a variable-speed drill with the polishing disc and keep the rotation speed low during operation.